This rugged snap gage features a precision box-way range adjustment channel to protect the anvil shafts and maximize frame clearance.
Features:
- 090" gaging travel is standard, optional with .500"
- Precision box way slide allows 1" of range adjustment
- Rugged frame is machined from 5/8" thick aluminum jig plate
- 5/8" solid carbide lapped anvils with generous lead radius
- Anvils are flat and parallel within .00015" on frame sizes below 4", .0002" on 4"-8", .00025" on 8-12" and .0003" above 12"
- Heat insulating impact resistant handles
- Adjustable nylon backstop protects parts
- Collet mounted indicator can be rotated to suit
Table below lists available SDN series snap gages models. For additional options and configurations please see the notes below table.
| Range | Indicator | Without Indicator | |
|---|---|---|---|
| Inch | Metric | 2I50-01 .0001" Graduation Multi Rev | |
| 0 - 1" | 0 - 25mm | SDN-00 | SDN-00NI |
| 1 - 2" | 25 - 51mm | SDN-100 | SDN-100NI |
| 2 - 3" | 51 - 76mm | SDN-200 | SDN-200NI |
| 3 - 4" | 76 - 102mm | SDN-300 | SDN-300NI |
| 4 - 5" | 102 - 127mm | SDN-400 | SDN-400NI |
| 5 - 6" | 127 - 152mm | SDN-500 | SDN-500NI |
| 6 - 7" | 152 - 178mm | SDN-600 | SDN-600NI |
| 7 - 8" | 178 - 203mm | SDN-700 | SDN-700NI |
| 8 - 9" | 203 - 229mm | SDN-800 | SDN-800NI |
| 9 - 10" | 229 - 254mm | SDN-900 | SDN-900NI |
| 10 - 11" | 254 - 279mm | SDN-1000 | SDN-1000NI |
| 11 - 12" | 279 - 305mm | SDN-1100 | SDN-1100NI |
| 12 - 13" | 305 - 330mm | SDN-1200 | SDN-1200NI |
| 13 - 14" | 330 - 356mm | SDN-1300 | SDN-1300NI |
| 14 - 15" | 356 - 381mm | SDN-1400 | SDN-1400NI |
| 15 - 16" | 381 - 406mm | SDN-1500 | SDN-1500NI |
| 16 - 17" | 406 - 432mm | SDN-1600 | SDN-1600NI |
| 17 - 18" | 432 - 458mm | SDN-1700 | SDN-1700NI |
| 18 - 19" | 458 - 483mm | SDN-1800 | SDN-1800NI |
| 19 - 20" | 483 - 508mm | SDN-1900 | SDN-1900NI |
| 20 - 21" | 508 - 533mm | SDN-2000 | SDN-2000NI |
| 21 - 22" | 533 - 559mm | SDN-2100 | SDN-2100NI |
| 22 - 23" | 559 - 584mm | SDN-2200 | SDN-2200NI |
| 23 - 24" | 584 - 610mm | SDN-2300 | SDN-2300NI |
| 48502 | Bench stand | ||
To order extended gaging contact travel, add "-TXX" to the end of part number.
- -T100 = .100" travel
- -T500 = .500" travel - standard with lifting lever (-L)
To order blade anvils, add "-BXXX" to the end of part number. Blade sizes available:
- -B40 = .040" wide x .08" tall
- -B60 = .060" wide x .12" tall
- -B80 = .080" wide x .16" tall
- -B100 = .100" wide x .20" tall
- -B125 = .125" wide x .31" tall
- -B156 = .156" wide x .31" tall
- -B187 = .187" wide x .31" tall
To order lifting lever, please add "-L" to the end of part number. For side stops, add "-SS" to the part #. Side stops are made to order.
Add new comment