14HE Optical Comparator Guide
All information set forth in this document, all rights to such information, any and all inventions disclosed herein and any patents that might be granted by employing the materials, methods, techniques or apparatus described herein are the exclusive property of Dorsey Metrology International, Poughkeepsie, New York.
Terms, conditions and features referenced in this document are subject to change without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Dorsey Metrology. Requests to Dorsey Metrology for permission should be addressed to the technical department. Technical department can be reached by phone at +1-845-849-0006.
Limit of liability and disclaimer of warranty
While Dorsey Metrology International exercised great care in the preparation of this manual, Dorsey Metrology International makes no representations or warranties with respect to the accuracy or completeness of the contents of this manual and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. The advice, methods and instructions contained in this manual might not be suitable for your situation. When in doubt regarding suitability, you are encouraged to consult with a professional where appropriate. Dorsey Metrology International shall not be liable for any loss of profit or any damages, including but not limited to special, incidental, consequential or other damages.
Trademarks
Dorsey Metrology is registered trademark of Dorsey Metrology International. Other trademarks are the property of their respective owners.
Safety
General safety precautions must be followed when operating the equipment. Failure to observe these precautions could result in damage to the equipment, or injury to personnel.
It is understood that safety rules within individual companies vary. If a conflict exists between the material contained in this guide and the rules of a company using this system, the more stringent rules should take precedence.
Additional safety information is included in safety chapter.
Icons
This manual uses the following icons to highlight information:
- DANGER
- This exclamation point on red background icon warn of a situation or condition that can lead to personal injury or death. It also indicates the presence of dangerous voltage that might be of sufficient magnitude to cause serious shock or death. Do not proceed until the warning is read and thoroughly understood. These messages are shown in bold type.
- WARNING
- This exclamation point on orange background icon warn of a situation or condition that can lead to equipment malfunction or damage. Do not proceed until the warning is read and thoroughly understood. These messages are shown in bold type.
- NOTE
- The note icon indicates additional or supplementary information about an activity or concept. Notes are shown in bold type.
Add new comment